1U ITX (SS-250SU)(3.5" Open Bay)(Rackmount Chassis)(Depth:9.84")(Riser Case) NEW

Description

PLinkUSA / RackBuy
1UMini-ITX 9.84" Deep
1x3.5" Open Bay
Rackmount Chassis
(Support Riser Card ) (Front / Rear Mountable) (Customize 1U IO shield Available)
Seasonic 1U / 2U Flex ATX 250W Active PFC F0
Bronze 80PLUS
Power Supply
ITX-123
_
SS-250SU
Brand NEW
PLCD-35 LCD Program Control Board Application (PLCD-35 Not Included)
ITX-123
(PLinkUSA / RackBuy)
Optional Back I/O shield
All Available 1U Back I/O shield list
ITX-123
_
SS-250SU
(PLinkUSA / RackBuy)
Note: Rail Set and CPU System on the pictures does not included
PRODUCT TECHNICAL SPECIFICATIONS
Storage space:
If two 2.5" HDD installed, one riser & expansion card allowed
If one 3.5" HDD installed, one riser & expansion card not allowed
If one 3.5" FDD installed, one riser & expansion card not allowed
If two 2.5" hotswap HDD cage installed, one riser & expansion card not allowed
Compatible with LCD control panel, two 2.5" HDD or one 3.5" HDD/FDD (or optional 2x2.5" hotswap HDD; need to work with TL-225; good for work w/ Industry ITX board build-in RAID function like Jetway NF93R-LF or Gigabyte GA-2AIEL5-RH)
3.5" open bay at front side with removable cover (LCD application)
drive bay equipped with anti-vibration function
Two USB 2.0 ports at front bezel
Aluminum extrusion front bezel with invisible intake air vent holes
front-access mounting
special design of storage device
Support 1 slot full high expansion card (max. 185mm long with 3rd Optional 4cm Fan; 220mm long without 3rd optional 4cm Fan); PCI / PCI-E
(
Note: if 3.5" HDD
or
3.5
" device
installed, the expansion card function is not available)
(Riser Card not Included)
Removable rear switch / LED to be ventilation; and the rear switches and LEDs are optional
Two 40mm x 20mm high speed intake fans behind the front bezel
All in one fan wire PCB to keep fast system maintenance
support 6.7"x6.7" standard Mini-ITX MB (170mm x 170mm)
Support standard 1U FlexATX PSU (max. psu depth: 150mm)  (Include 250W power supply)
standard paint: black
Various
PLinkUSA / RackBuy 1U
I/O shield
available (option, increasing more items daily)
Chassis dimension: 19" x 1U x 250mm (9.84" deep)
The Seasonic industrial level switch mode power supplies offer a reliable source for a wide range of setups. Our Flex ATX range with its full range AC input comes in 250 W and 200 W versions and is the ideal choice for workstations, standard or advanced servers and various automation or communication applications. These units comply with the latest PFC harmonics and are protected against short circuit, over voltage and over power. Their super low noise fan control makes them a pleasant companion in any industrial system.
Flex ATX v1.0 compliant
Forward converter circuit
High efficiency and reliability
Zero minimum load on 3.3 V rail
40 mm double ball bearing fan
Super low noise fan control
Short circuit protection on all outputs
Over voltage protection
Over power protection
100 % HiPot test
100 % Burn-in, high temperature cycled on/off
PFC harmonics compliance: EN61000-3-2: 2006 + A1: 2007 + A2: 2009
Specification
Model
DC Outputs
+3.3 V
+5 V
+12 V Combined
-12 V
+5 V
sb
Total continuous power
Input Type
SS-250SU APFC F0
(80 PLUS
®
Bronze)
14 A
17 A
18 A
0.8 A
2 A
250 W
Full range
110 W (max.)
216 W
Specifications
Input frequency
50 / 60 Hz
Efficiency (at normal input voltage)
> 80 % (250SU only)
Dielectric withstand, input to frame/ground
1800 VAC, 1 sec
Dielectric withstand, input to output
1800 VAC, 1 sec
Line regulation
± 1 % (typical)
Load regulation
± 5 % (typical)
Cross regulation
± 5 % (typical)
MTBF, full load @ 25 °C ambient (excl. DC fan)
> 100,000 hours
Active Power Factor Correction
99 % (typical)
Support list 1U ITX-102 , ITX-122, ITX-G1102D, IPC-1004M , IPC-1211M , IPC-1033M, IPC-G1320M, ITX-G2250,  IPC-G252S
United States (48 States) Please check with "Shipping and Payments"
Canada (Buyer is responsibility to pay any duty and brokerage fee)
ITX-123
(PLinkUSA / RackBuy)
Note: Rail Set and CPU System on the pictures does not included