Margin Roller Burnisher Hammer Out Porosity Pit Riveting Rotary Bur 10mm German

Description

MARGIN ROLLER BURNISHER FOR CASTING POROSITY PITS
RIVETING WHEEL BUR DIAMETER SIZE  10mm
These Margin Roller Burnisher are for
use to hammering out porosity pits
from Gold, Silver, without metal loss.  These wheel burs should be used at a relatively higher speeds with rotary handpices with light pressure being applied to the surface of the metal.
NOTE: Allow the margin roller bur with the individual wheels on the head to do the work, too much pressure can damage the tool as well as cause injury. Applying light pressure by moving the bur back and forth across the surface in several directions... until results are achieved. Use margin roller to burnish and remove porosity or to remove marks, pits or scratches, works for the inside of rings and bracelets as well. Bur must be inserted into Rotary Handpiece as close as possible to the chuck or collet head.
Note: There are
3 sizes available
of the Margin Roller Burnisher Wheel Burs. Each have roller bearings that do the work on the surface of the metal. The small 8mm diameter wheel has 6 roller wheels, the
medium 10mm diameter has 8 roller wheels
and the large 12mm has 12 roller wheels.
See last 3 picture on this listing
SPECIFICATIONS:
JETS Product # 0201-2452-100
Made by
Meisinger
Germany
-
Material:
Steel
-
Head Diameter Size:
10mm - ISO 100
-
Shape :
Round Wheel
(8 roller wheels)
-
Shank Size :
3/32
"
NOTE: Visit
JETSTOOLS
our ebay Store Listings for a wide variety of Burs in various Shapes, Sizes and Sets, along with a range of Hand Tools for Jewelry Making and many more
J
ewelers
E
quipment
T
ools
and
S
upplies
.
JETSINC.
Note: Contact us for individual Bur sizes as well as other Shapes of Jewelers Burs...
B3 220 CKSP  M P